Push-out / retention force test for automotive connectors
Automotive HV/LV Connector Pin-Retention Tester in one sentence: The LP-PR3000 measures the push-out force holding a terminal or pin in its housing, rejecting loose parts before they reach harness assembly. It supports high-mix work through a multi-spec fixture library and exports the measurements to support IATF 16949 traceability.
The LP-PR3000 measures pin-retention (push-out) force of high- and low-voltage automotive connectors within IATF 16949 workflows, rejecting loose terminals before they reach harness assembly.
Typical applications: Automotive Electronics · New Energy
Talk to an Engineer →It measures retention force only, so it does not check crimped joint quality, insulation or electrical performance. The 0 to 200 N range suits connector pins; larger mechanical parts need a different load frame.
| Parameter | Value | Unit | Test condition |
|---|---|---|---|
| Force range | 0-200 | N | Push-out (retention) measurement |
| Resolution | 0.1 | N | Display and logged value |
| Test mode | Automatic push-out cycle | Fixture-based, per part recipe | |
| Reject handling | Automatic sorting | Out-of-window parts separated | |
| Data export | SPC export | For process control records | |
| Fixture library | Multi-specification | High-mix capable, quoted per family |
| Model | Key specifications | Positioning |
|---|---|---|
| LP-PR3000 | 0-200 N, 0.1 N resolution, SPC export | Retention testing before harness assembly |
| J30J-WSM | 100% sequence check and laser marking | Sequence verification rather than force measurement |
| Marking and Testing Machines | Vision plus marking range | Inspection cells covering appearance and traceability |
| MOQ | 1 set | ||
|---|---|---|---|
| Lead time | Confirmed per order, depends on configuration | ||
| Availability | InStock | ||
| Quote terms | Written quotation within 24 working hours | ||
| Certifications | CE | ||
An all-in-one wire-sequence inspection and marking machine built for micro-rectangular connector makers. It verifies wir
Lanneas marking and testing machines combine real-time vision inspection with laser marking to prevent wrong wire sequen
A high-precision automatic crimping machine built for micro-rectangular connectors. It solves the core production pain o
| Force range | 0–200 N |
|---|---|
| Resolution | 0.1 N |
| Standard | IATF 16949 workflow |
| Throughput | 600–900 pcs/h |
| Data | SPC export |
| Fixtures | multi-spec |
High-accuracy servo crimping for micro-rectangular twist-pin connectors
100% in-line wire-sequence verification with automatic marking
15-station one-operator antenna assembly cell
Share your sample or drawing, target throughput and quality standard — we reply within one business day.
Request a Quote →Connector and wire-harness production lives or dies on repeatability. Manual crimping and bench assembly introduce operator-to-operator variation, scattered process steps and rework that only surface at final test. The Automotive HV/LV Connector Pin-Retention Tester concentrates testing & inspection into a controlled, data-logging station so quality is built in, not inspected in.
It is most often specified for Automotive Electronics, New Energy, where unstable accuracy, high scrap and slow delivery are the recurring pain points. Because recipes and process data are digitized, the same machine scales from low-volume, high-mix programs to high-volume production without re-engineering the cell.