15-station one-operator antenna assembly cell
SMA/SMB Antenna Automated Assembly Machine in one sentence: The ANT-15 puts crimping, welding, testing and marking into one 15-station cell for 174, SMA, SMB and GPS antennas. One operator runs it at 500 to 600 pieces per hour with yield above 98 percent, replacing a manual bench line with a process that can be qualified and repeated.
The ANT-15 integrates 15 stations — crimping, welding, testing and marking — into a single cell for 174 / SMA / SMB / GPS antennas. One operator runs the line at 500–600 pcs/h with yield above 98%.
Typical applications: Telecom & 5G / RF · Automotive Electronics · Radar & Communications
Talk to an Engineer →Built around antenna families in the 174 / SMA / SMB / GPS range. A connector geometry outside that list needs new station tooling, so it becomes a custom build rather than a standard ANT-15. It is a cell for volume production, not a bench tool for prototype quantities.
| Parameter | Value | Unit | Test condition |
|---|---|---|---|
| Process stations | 15 | stations | Crimping, welding, testing and marking integrated |
| Output | 500-600 | pcs/h | One operator, continuous running |
| Yield | ≥98 | % | Across supported antenna families |
| Antenna types | 174, SMA, SMB, GPS | Tooling set confirmed at order | |
| Operators | 1 | per cell | Loading and unloading included |
| Data | MES-ready output | Production counters and test results | |
| Layout | Flexible, customisable | Station order follows your process |
| Model | Key specifications | Positioning |
|---|---|---|
| ANT-15 | 15 stations, 500-600 pcs/h, one operator | Full antenna cell when all four processes run in one line |
| LP-CW2060 | Closed-loop temperature, RG58 / SMA / 178 | Soldering station only, added to an existing line |
| LP-MC2024 | ±0.01 mm, closed-loop force, MES export | Crimping station only, for twist-pin contacts |
| MOQ | 1 set | ||
|---|---|---|---|
| Lead time | Confirmed per order, depends on configuration | ||
| Availability | InStock | ||
| Quote terms | Written quotation within 24 working hours | ||
| Certifications | CE | ||
An automatic soldering machine for RG58, SMA and 178 antenna makers. It solves the core problems of unstable solder volu
From wire feeding and stripping to crimping, welding, high-voltage testing and heat-shrink packaging, our automatic asse
When a standard machine cannot fit your part, Lanneas designs and builds custom wire harness equipment around your produ
| Stations | 15 |
|---|---|
| Output | 500–600 pcs/h |
| Yield | ≥ 98% |
| Operators | 1 |
| Applicable | 174 / SMA / SMB / GPS antenna |
| Footprint | customizable |
High-accuracy servo crimping for micro-rectangular twist-pin connectors
100% in-line wire-sequence verification with automatic marking
Precision solder welding for RF center pins
Share your sample or drawing, target throughput and quality standard — we reply within one business day.
Request a Quote →Connector and wire-harness production lives or dies on repeatability. Manual crimping and bench assembly introduce operator-to-operator variation, scattered process steps and rework that only surface at final test. The SMA/SMB Antenna Automated Assembly Machine concentrates automated assembly lines into a controlled, data-logging station so quality is built in, not inspected in.
It is most often specified for Telecom & 5G / RF, Automotive Electronics, Radar & Communications, where unstable accuracy, high scrap and slow delivery are the recurring pain points. Because recipes and process data are digitized, the same machine scales from low-volume, high-mix programs to high-volume production without re-engineering the cell.